LZK 2500 P/SH

VERTICAL FORGING PRESSES
LZK 2500 P/SH

LZK 2500 P/SH

Vertical forging presses are used for production of precise die forgings with utilization in the automotive industry, for hot and semi-hot forging with forming forces of 10-65 MN, with high stiffness and extensive diagnostics, including modern, precise and solid fixtures and other comprehensive equipment.

LZK  is mechanical vertical crank one-point press with upper drive and with placing of main shaft in frame in direction from front to back (crosswise to the direction of technological process of forging).

TECHNICAL PARAMETERS

LZK 1000 P/SH LZK 1600 P/SH LZK 2500 P/SH LZK 3150 B LZK 4000 B LZK 5000 LZK 6500
Nominal forming force kN 10000 16000 25000 31500 40000 55000 65000
Shut height mm 620 760 905 1000 1000 1100 1150
Passage mm 1040 1230 1410 1580 1580 1670 2100
Bad area mm 1000x950 1180x1120 1340x1400 1520x1520 1520x1600 1710x1710 1950x1900
Ram area mm 968x750 1138x920 1320x1100 1450x1450 1470x1500 1540x1650 1900x1700
Ram adjustment mm 10 10 10 20 20 20 15
Ram stroke/Number of strokes mm/min-1 220 280/85 320/65 360/65 380/60 400/55 450/40
Electro-engine output kW 55 75 130 175 200 330 420
Machine dimensions l*w*h m 2,0*2,6*4,6 2,0*3,0*5,5 3,8*4,0*6,7 6,5*4,6*4,3 4,6*4,7*7,6 7,8*5,9*4,9 7,7*7,3*6,3
Přestavování beranu - ruční ruční ruční hydraulické hydraulické
Uvolňování beranu - ručním hydraulickým čerpadlem a hydraulickým pístem ručním hydraulickým čerpadlem a hydraulickým pístem ručním hydraulickým čerpadlem a hydraulickým pístem hydraulické hydraulické

S - provedení se svařovaným stojanem
H - hydraulické přestavení a uvolnění beranu

TECHNICAL DESCRIPTION

Frame is casting from one piece of casting steel, it is thermaly treated for eliminating of the material tension. His firm box design does not ask for using of anchors. Ram is casting from one piece of alloyd steel for castings. The leading of ram in laths of the frame has shape „O“. Ram adjustment is driven by a hydraulical mechanism and i tis controlled by buttons from controlling panel. Countershaft is placed in the upper part of the frame on the right side in the sliding bearings. Countershaft is placed in upper part of the frame on right side in sliding bearings. The press is equipped by multi-plate frictional clutch, which is controlled by electropneumatical valve. The press is equipped by multi-plate frictional brake also, which is controlled by electropneumatical valve. Used frictional material is asbestosless. The press is equipped with upper pneumatic and lower hydraulic ejectors. Power of the lower hydraulic ejector is 800 kN with stroke 60 mm. The lower hydraulic ejector conducts 5 stroke per minute with maximal power. Power of the upper pneumatic ejector is 130 kN with stroke 50 mm. Basic span of pegs of both ejectors is 380 mm. The press is equipped with an automatical independent oil circulatory lubricating system of sliding bearings of crank mechanism and with an automatical independent fatty lubricating system of laths of ram guiding and of die holder. Hydraulic system of the press is utilized only for ram adjustment. Pneumatical system of the press works with the air pressure from the distribution system of the forging plant.

Logo

COOKIES - Privacy settings:

These websites use cookies and other network identifiers that may contain personal data. These data helps us to operate and improve our services and to develop new services for you and our other users.

Šmeral Brno a.s. processes some data on the basis of a so-called legitimate interest. You can raise objection to processing based on the legitimate interest. In the case of the objection to the processing performed by Šmeral Brno a.s. you can contact our data protection officer.

 

If you click on a button „I understand and I accept“, you confirm that you have learnt all the informations about processing of cookies, and you approve of all the purposes, which can be approved through this interface of.

If you decide not to give your consent, please leave browsing the site.

 

Purposes of data processing:

Store and/or access to informations on the device. Personalized advertising and content, measuring advertising and content, knowledge of audience circles and product development. Measuring, evaluating and researching website traffic sources and generating statistics. We do so because of our legitimate interest in tracking traffic and improving our website.

We use Google Analytics, provided by Google, Inc., to measure traffic to our website.

We assess cookies only in bulk and in an anonymous form, which does not allow the identification of individual visitors to our website. We do not monitor or store your IP address.

Data processing is performed by Šmeral Brno a.s. Křenová 65c, 602 00 Brno, IČO 46346139, which is also the operator of the website https://www.smeral.cz/.