ACTUAL OFFER after overhaul and modernization

LZK 1000 P - VERTICAL FORGING PRESS

LZK 1000 P second-hand forging press parameters:

  • Nominal forming force - 10 000 kN
  • Number of strokes - 100 strokes/min
  • Ram stroke - 220 mm
  • Shut height - 620 mm
  • Ram adjustment - 10 mm
  • Passage - 1040 mm
  • Working area of table - 1000x950 mm
  • Working area of the ram - 968x750 mm
  • Press height above floor - 4600 mm
  • Press width - 2400 mm
  • Press Depth - 2930 mm
  • Press weight - 48 tons

LZK 1600 P - VERTICAL FORGING PRESS

LZK 1600 P second-hand forging press parameters:

  • Nominal forming force - 16 000 kN
  • Number of strokes - 85 strokes/min
  • Ram stroke - 280 mm
  • Shut height - 760 mm
  • Ram adjustment - 10 mm
  • Passage - 1230 mm
  • Working area of table - 1180x1120 mm
  • Working area of the ram - 1138x920 mm
  • Press height above floor - 5470 mm
  • Press width - 2840 mm
  • Press depth - 2980 mm
  • Press weight - 85 tons

LMZ 4000 - VERTICAL FORGING PRESS

LMZ 4000 second-hand forging press parameters:

  • Nominal forming force - 40 000 kN
  • Number of strokes - 60 strokes/min
  • Ram stroke - 380 mm
  • Shut height - 110 mm
  • Ram adjustment - 20 mm
  • Passage -1850 mm
  • Working area of table - 1800x1700 mm
  • Working area of the ram - 1550x1700 mm
  • Press height above floor - 8105 mm
  • Press width - 4720 mm
  • Press depth - 4640 mm
  • Press weight - 250 tons

LDO 315 - TRIMMING PRESS

LDO 315 second-hand trimming press parameters:

  • Nominal forming force - 3 150 kN
  • Number of strokes - 44 strokes/min
  • Ram stroke - 200 mm
  • Shut height - 600 mm
  • Ram adjustment - 140 mm
  • Passage - 1400 mm
  • Working area of table - 1380x950 mm
  • Working area of the ram - 1380x950 mm
  • Press height above floor - 5040 mm
  • Press width - 2610 mm
  • Press depth - 2470 mm
  • Press weight - 27 tons

LKT 250 A - CRANK PRESS

LKT 250 A second-hand crank drawing press parameters:

  • Nominal forming force - 2 500 kN
  • Number of strokes - 25 strokes/min
  • Ram stroke - 250 mm
  • Shut height - 760 mm
  • Ram adjustment - 125 mm
  • Passage - 1600 mm
  • Working area of table - 1600x1200 mm
  • Working area of the ram - 1560x900 mm
  • Press height above floor - 4615 mm
  • Press width - 3240 mm
  • Press depth - 1700 mm
  • Press weight - 27 tons

LENP 100 - ECCENTRIC PRESS

LENP 100 second-hand eccentric press parameters:

  • Nominal forming force - 1 000 kN
  • Number of strokes - 56 strokes/min
  • Adjustable ram stroke - 10-125 mm
  • Shut height - 320 mm
  • Ram adjustment - 80 mm
  • Throat - 320 mm
  • Passage - 320 mm
  • Working area of table - 900x600 mm
  • Press height above floor - 2690 mm
  • Press width - 1265 mm
  • Press depth - 2200 mm
  • Press weight - 7 tons

KJH 4 - DROP HAMMER

KJH 4 second-hand drop hammer parameters:

  • Nominal forming energy - 40 kJ
  • Number of ram strokes - 40-100 strokes/min
  • Ram stroke - 500 mm
  • Minimum heigth of the dies - 350 mm
  • Locking dimensions in the upper holder - 286x600 mm
  • Locking dimensions in the lower holder - 286x600 mm
  • Drop hammer heigth above floor - 3900 mm
  • Drop hammer weight - 27 tons
Range of the overhaul and modernization is as per the customer´s order!
We will provide you with detailed information about offered second-hand forming machine and proposed overhaul way on the basis of your demand that you can send to the email:
E-mail: go@smeral.cz